CONTACT US - CLICK HERECONTACT US - CLOSE HERE 

Service Team
Telefon: +46 (0)771 94 22 00
Email: service(a)se.mullermartini.com

Reservedelar
Telefon: +46 (0)771 94 24 00
Email: spares(a)dk.mullermartini.com 

Salg/Administration
Telefon +46 (0)771 99 67 00
Email: info(a)se.mullermartini.com

Öppettider: 
Måndag-Torsdag: 08:00-16:00
Fredag: 08:00-14:00

Do you have questions?
Contact us.

Service Team
Telefon: +46 (0)771 94 22 00
Email: service(a)se.mullermartini.com

Reservedelar
Telefon: +46 (0)771 94 24 00
Email: spares(a)dk.mullermartini.com 

Salg/Administration
Telefon +46 (0)771 99 67 00
Email: info(a)se.mullermartini.com

Öppettider: 
Måndag-Torsdag: 08:00-16:00
Fredag: 08:00-14:00

Müller Martini Nordic A/S
Hørkær 28
2 floor
DK-2730 Herlev
Denmark

Phone: +46 (0)771 99 67 00

Show map

Request download

Faster and More Diverse Production

20.06.2019

Thanks to a new Primera MC saddle stitcher, Drukkerij Van der Poorten NV in the Belgian city of Leuven has cut its setup times in half and expanded its product range.

The old Prima Tandem is still available if needed, but a new era has begun at Van der Poorten with the new Primera MC. The saddle stitcher, which has eight flat pile feeders, a cover feeder, a Perfetto compensating stacker and an interface for exchanging data between the Primera MC and the Perfetto, is the answer to increasingly smaller print runs. For jobs of as few as 300 copies, Van der Poorten has reduced changeover times by 50 percent. In addition, with the help of the hole punching device in the three-knife trimmer, the printing house is now able to produce new products inline as well.

With the new Primera MC, Van der Poorten is able to change over 50% more quickly compared to the previous machine.

Jeroen Van der Poorten’s long-term make-ready goal is a 75 percent time saving with almost no production waste. “That way we will be able to offer our customers better prices,” says the managing director of the family company. But Van der Poorten, the grandson of the company’s founder, who has relied on Muller Martini’s solutions and good service for decades, is not impressed with just the higher productivity. The Asir 3 signature scanning system is valuable to him because in Belgium a number of magazines are published in three languages, so it must be ensured that the products are assembled correctly. 

The high-tech three-knife trimmer not only makes a considerable contribution to higher productivity but also has a hole punching device, which is especially important for the production of calendars. Before the new saddle stitcher was commissioned, this process was carried out offline in two steps. “Now, of course, our production is much more profitable and we are able to offer our customers new products,” says Jeroen Van der Poorten, noting the two key advantages of the Primera MC for him.

Download News

Download File

PI 2202.jpg